ADC-VDB770 enrollment best practices
Sep 25, 2025
366
ADC‑VDB770 Doorbell – Install, Enrollment & Setup
The power module included with the ADC‑VDB770 is required for every installation. For detailed wiring, see the installation resources below.
Before You Begin
- Verify chime & button work: Ring the existing doorbell to confirm the circuit functions properly.
- Internet upload speed: Ensure ≥ 2.5 Mbps upload at the install location.
- Transformer requirements: AC 16–30V AC, 10–30VA; DC 15–30V DC, 8W minimum. Install the included power module.
Power Module – User Guide ADC‑VDB770 – Installation Guide
Enroll the ADC‑VDB770
Using the Customer App
- Log in to the Alarm.com Customer app.
- Tap + Add Device → Video Camera.
- Enter the MAC address.
- Follow on‑screen instructions to complete enrollment.
Using the Customer Website
- Log in → Settings → Manage Devices → Add Device → Video Camera.
- Click Install on the device or enter the MAC address.
- Follow the prompts to finish enrollment.
After Enrollment
Set the Chime Type
Website: Video → Settings → Video Device → Video Device Info → Chime Type → Save.
App: Doorbell Camera → settings → Chime Type → Save.
Select the Mounting Wedge
Choose the Wedge Type that matches the letter printed on the bracket (Website/App → Video Device Info → Wedge Type → Save).
Create a Recording / Analytics Rule
- Person detection: Notify when a person is identified within a configured Ground Zone.
- Z‑Wave lights automation: Turn on lights when a person is detected.
- Touchless Doorbell: Automatically ring when a guest enters a secondary Ground Zone.
Configure a Doorbell Video Analytics Rule Touchless Doorbell – User Guide Create Doorbell Motion & Button Notifications
