How to Enable and Use the Touchless Doorbell Feature on the ADC-VDB770

The Touchless Doorbell feature allows guests to stand in a designated zone to trigger your ADC-VDB770 Video Doorbell without pressing the button.

Enable Touchless Doorbell via Customer Website

Log into the Customer Website.
Click Video > Recording Rules.
Edit an existing Video Analytics rule or click + Add New Rule.
Toggle Enable Touchless Doorbell to On.
Click and drag to create a Ground Zone where guests can stand to trigger the doorbell.
Select the required duration a guest must stay in the zone.
Click Save.

Enable Touchless Doorbell via Customer App

Log into the Customer App.
Tap Video > Recording Rules.
Edit an existing Video Analytics rule or tap + Add New Rule.
Toggle Enable Touchless Doorbell to On.
Drag to create the Ground Zone.
Choose the Duration Inside Area of Interest.
Tap Save.

Best Practices

Keep the Ground Zone small to reduce false triggers.
Avoid high-traffic paths (like walkways or mail paths).
Offset the zone slightly from the door—such as the bottom step—so guests naturally trigger it before pressing the button.

Accessories

Video Doorbell Mat (ADC-VDBA-MAT): Indicates where guests should stand.
Video Doorbell Touchless Cover (ADC-VDBA-COVER): Blocks the physical button to encourage touchless use.

FAQs

Is the notification different? No, it’s identical to a button press.
Can it trigger Z-Wave lights? Yes, through Video Analytics rules.
Can I disable button presses? No, button presses always remain active.
How often can it trigger? Once every 10 seconds.
If a guest presses the button after touchless is triggered? The chime will sound again.

Troubleshooting

If the Touchless Doorbell triggers outside the Ground Zone, reduce the zone size. A buffer is included around the zone for quicker response, so adjusting its size improves accuracy.