256
Designed specifically to work with the Alarm.com hosted video service, the ADC-SVR122 Stream Video Recorder provides a 24x7 professional local video storage solution. With the Stream Video Recorder, you can connect up to eight Alarm.com video cameras for continuous recording.
Included Accessories
- Stream Video Recorder (SVR)
- Power Adapter
- Quick Installation Guide
Specifications
| Recording channels | Up to 8 Cameras |
|---|---|
| Video output | 8 channels |
| Compatible cameras |
ADC-V520, ADC-V520IR, ADC-V521IR, ADC-V522IR, ADC-V523, ADC-V515, ADC-V620PT, ADC-V622, ADC-V720, ADC-V720W, ADC-V721W, ADC-V722W, ADC-V723, ADC-V820, ADC-V821, ADC-VC725, ADC-VC726, ADC-VC736, ADC-VC825, ADC-VC826, ADC-VC836, ADC-VS120, ADC-VS121, ADC-VS123, and ADC-VS420 |
| Storage |
500GB, 1TB, or 2TB of storage Note: To calculate how many hours of video can be stored on an SVR, see How much video can be stored on Alarm.com SVRs?. |
| Transcoded playback | MPEG4 H.264 |
| Speed control | 1x, 4x, 8x, 16x |
| HDD bay | 1 Bay |
| Ethernet connection | 10Base-T/100BaseTX (RJ45) |
| HDMI and USB connections | Locally view live and recorded video |
| Cooling | Fanless Thermal Heat Sink |
| Dimensions | 3.5 x 3.5 x 5.8” (88 x 88 x 146.7 mm) |
| Operating temperature | 32⁰-104⁰F (0⁰-40⁰C) |
| Storage temperature | -13⁰ to 158⁰F (-25⁰ to 70⁰C) |
| Operating humidity | 20%-95% RH (non-condensing) |
| Power adapter | 12V DC 1.5A with UL/CE/FCC certification |
For Internet service and bandwidth requirements, see What are the internet service and bandwidth requirements for Alarm.com video devices?.
For information about frame rate (FPS), see What is the frame rate for video?.
LED Guide
| LED location | LED status | Description |
|---|---|---|
 |
Solid Green
|
Internet connection Local network and Internet connection |
|
Flashing Green
|
Local network connection Local connection only, no Internet |
|
|
Flashing Red (1 sec)
|
SVR firmware versions 1.0.1.2 + SVR is booting/No connection SVR firmware versions below 1.0.1.2 No connection Check the user's Internet service — for more information, see Troubleshooting |
|
|
Solid Red
|
Cameras not recording or hard drive error Check LEDs on back of SVR |
|
|
Flashing Green & Red
|
Factory Reset Caution: This restores factory-default settings to the device. If already installed, the device To perform a factory reset, push the Reset button and release when flashing Green and Red |
|
 |
Solid Green
|
SVR hard drive is operating normally |
|
Flashing Green
|
Hard drive is full Normal operation, oldest footage is being deleted |
|
|
Solid Red
|
Hard drive error Use the Customer Website to perform diagnostics |
|
|
Flashing Red every 1 second
|
Hard drive configuration error Use the Customer Website to perform diagnostics |
|
|
Flashing Red every 0.2 seconds
|
Hard drive is disconnected Use the Customer Website to perform diagnostics |
|
 |
Solid Green
|
Camera is connected and recording |
|
Flashing Green
|
Recording is paused Camera is connected and recording is paused |
|
|
Flashing Red
|
Camera not recording Camera is disconnected or improperly configured |
