• Stream Video Recorder (ADC-SVR100) and AC power adapter (included)
• Ethernet Cable (included)
• Broadband (Cable, DSL, or Fiber Optic) Internet connection
• Internet router
• Windows or Mac computer
• Login/password for the customer's account

Packaging contains

• 1 Stream Video Recorder (SVR)
• 1 Power adapter
• 2 white hard drive mounting brackets and screws (may be preinstalled if the hard drive is included)
• 1 security screw wrench for opening the SVR
• 2 zip ties
• 1 Ethernet cable

For a detailed list of this video device's features, see Stream Video Recorder (ADC-SVR100) - Data Sheet.

To install the SVR:

1. Use a standard Ethernet cable to connect the SVR to the router.
   
   Important: The SVR must be connected to the same router as the cameras to be associated with it. 
    
2. Connect the SVR to the AC adapter and plug it into an electrical outlet.
3. Allow a few minutes for the SVR and router to connect. When the PWR LED is solid green, the wireless connection is complete. 
4. Add the device to the account by selecting the account in the MobileTech app, by using the Customer app Video Installation Wizard, or by using a web browser and entering the following web address: www.alarm.com/addcamera (you will need the customer’s user name and password if using the Customer Website).  For more information about adding a camera to an account, see Enroll the video device to the customer account. 
5. Follow the on-screen instructions to enroll and set up the SVR. For more information about adding a camera to an account, see Enroll the video device to the customer account. 

For more information about associating cameras to the SVR, see Associate a camera to an SVR. 

LED guide