You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > True Protection > CCTV Systems > Alarm.com Cameras > Alarm.com Cameras > Stream Video Recorder (ADC-SVR122) - Installation Guide
Stream Video Recorder (ADC-SVR122) - Installation Guide
print icon

Stream Video Recorder (ADC-SVR122) Installation & Setup Guide

The ADC-SVR122 Stream Video Recorder makes it easy to locally record, store, and view video from your True Protection security cameras. This guide covers everything from pre-installation to troubleshooting.

Pre-Installation Checklist

  • Stream Video Recorder (ADC-SVR122)
  • AC power adapter (included)
  • Ethernet connection to broadband Internet (Cable, DSL, Fiber)
  • Login and password for the customer account

Adding the SVR to Your Account

  1. Connect the SVR to the router using the included Ethernet cable.
  2. Plug in the AC power adapter to a non-switched outlet.
  3. Wait for the status LED to turn solid green (indicates full connection).
  4. Add the device to the account using the MobileTech app, Customer app Video Installation Wizard, or through the website login page.
  5. Follow the on-screen instructions to complete setup and associate cameras with the SVR.

LED Reference Guide

Status LED

  • Solid Green: Local + Internet connection.
  • Flashing Green: Local network only (no Internet).
  • Flashing Red (1s): Booting or no connection.
  • Solid Red: Cameras not recording or HDD error.
  • Flashing Green & Red: Factory reset in progress (hold reset ~15s).

Hard Drive LED

  • Solid Green: Hard drive operating normally.
  • Flashing Green: Hard drive full, overwriting oldest footage.
  • Solid Red: Hard drive error.
  • Flashing Red (1s): Hard drive configuration error.
  • Flashing Red (0.2s): Hard drive disconnected.

Camera LEDs

  • Solid Green: Camera connected and recording.
  • Flashing Green: Camera connected but recording paused.
  • Flashing Red: Camera disconnected or not recording.

Viewing Live & Recorded Video Locally

  1. Connect the SVR122 to a TV or monitor using an HDMI cable.
  2. Plug in a wired or wireless USB mouse to the SVR122.
  3. Move the mouse to open the main menu. Options include:
    • Layouts & Rotation: Choose different live view layouts and rotate feeds.
    • Search: Watch recorded video and control playback speed.
    • Settings: Manage camera connections, layout positions, and rotation options.

Troubleshooting

  • Connection Issues: Power cycle the SVR and verify the Ethernet cable and Internet access.
  • Factory Reset: Hold the reset button until the status LED flashes green and red (~15s). Re-add the device to the account if previously installed.
  • Hard Drive Errors: Run diagnostics through the Customer Website.
  • Camera Not Recording: Check camera connections and configuration.

Helpful Resources

Explore more from True Protection:

Feedback
0 out of 0 found this helpful

Attachments

SVR122_QuickInstallGuide_Final.pdf
scroll to top icon