Resetting a device to its factory default settings removes all of its existing programming. Most devices must be removed from the account and re-enrolled after a factory reset.

Important: Wait at least 2 minutes for the device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on.

Reset procedure	Reset button location	Reset button image
Press and hold the [Reset] button until the status LED on the front rapidly flashes red and green which usually happens after 15 seconds.	The Reset button is on the back of the SVR.

Important: Once a video device has been reset, it's normal for the LED to turn off momentarily. It is best to leave the video device plugged into power and undisturbed for two minutes after performing the factory reset.