The Commercial Stream Video Recorder plays back live and recorded video locally to one or two monitors using its HDMI and/or VGA outputs. The ADC-CSVR126 can output the video of all of the cameras associated to it.

Note: Remote playback is possible using the Customer Website or app. For more information about remote SVR playback, see Use the Stream Video Recorder (SVR) timeline to stream playback.

To connect the ADC-CSVR126 to a monitor:

1. Connect the Commercial Stream Video Recorder to up to two monitors using its VGA and HDMI ports.
   • When a single display is connected to the Commercial Stream Video Recorder, recorded and live video are both available on the same display.
   • If two displays are connected, recorded video is available on the primary display and live video is available on the secondary display. For more information about adjusting the primary and secondary displays, see Adjust the ADC-CSVR126 local display settings.
2. Connect a USB mouse to either USB port on the Commercial Stream Video Recorder to control the user interface. If a USB mouse is unavailable, the control pad is capable of some navigation.

Note: The local interface can be password protected. Users can view and change the local interface password using the Customer Website. For more information about setting the password, see Password protect the ADC-CSVR126's local user interface.

Live video controls

Note: When two monitors are connected, live video is available on the secondary display.

• Click and drag the live video panes to rearrange them. The ADC-CSVR126 retains this arrangement after it is rebooted.
• Change the layout to any of the following options:
  
  
   
  • Cycle through different video pages if there are more cameras than the selected layout can make visible.
• Click  start/stop camera rotation.
• Click  to view live video in full screen.

Recorded video controls

Note: When two monitors are connected, recorded video is available on the primary display.

• Use the slider to adjust what time/date to play back.
  
  
• Use the Timeline Scale slider to adjust the scope of the timeline.
  
  
   
• Click  to make a clip to export. For more information about exporting video, see Export video using the ADC-CSVR126 local interface.
• Click  or  to skip forward or backward.
• Click  to play footage backwards.
• Click  to play footage.
• Click  or  Adjust playback speed.
• Click  to view multiple cameras at once.
• Click  to view video in full screen.

To access recorded video using the local interface:

1. Log into the local interface if it is password protected.
2. Click .
3. Click Playback.
4. In Camera, select which camera to play back.
5. In Time, select a playback date.

System functions

Users can turn the Commercial Stream Video Recorder on and off, factory reset it, and log out of the system.

• Click Factory Reset to reset the device to its default settings. For more information about the factory reset procedure, see Factory reset the ADC-CSVR126 to its default settings.
• Click  to access options to log out, shut down, or restart the ADC-CSVR126.
  
  
   
• Click  to view the export status.