You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > True Protection > Home Automation Equipment > Configure the Smart Away thermostat schedule
Configure the Smart Away thermostat schedule
print icon

Using Smart Away with Alarm.com Smart Thermostats

The Smart Away feature automatically pauses your existing Z-Wave thermostat schedule when you Arm Away your security system or when all selected Geo-Devices leave the Geo-Fence. When you disarm the system or re-enter the Geo-Fence, the thermostat schedule resumes. This helps regulate your home or business temperature while saving energy.

How Smart Away Works

Smart Away uses your scheduled Away temperature for the active mode (Heat or Cool):

  • If the thermostat is in Cool mode and Away is set to 80°F, arming the system will allow A/C to run until 80°F is reached, then stop.
  • If in Heat mode, it will heat until the Away temperature is reached.

Enable Smart Away from the Customer Website

  1. Log into the Customer Website.
  2. Click AutomationSchedules.
  3. Locate the thermostat schedule and click the edit icon.
  4. Click Smart Away. The Smart Away setup window appears.
  5. Use the toggle switch to enable/disable Smart Away.
  6. Select which triggers will apply:
    • System is set to Armed Away – thermostat follows Away temperature when armed.
    • All of the Geo-Devices – thermostat follows Away temperature when the last selected device exits the Geo-Fence.
  7. If Geo-Devices are selected, use the dropdown menus to choose which devices and which Geo-Fence apply.
  8. Click Save Schedule.

Set Up Geo-Service Thermostat Override

Geo-Service Thermostat Override works with thermostat schedules to adjust temperature automatically based on your smartphone location. Thermostat schedules resume when you disarm the system or return inside the Geo-Fence.

Create a Geo-Service Thermostat Override Rule

  1. Log into the Customer Website.
  2. Click SettingsGeo-Services.
  3. Under Set up Geo-Features, select Smart Away Thermostat Override.
  4. Use the toggle switch to enable the override rule.
  5. Select which Geo-Devices will trigger the override.
  6. Select the Geo-Fence to apply the rule to.
  7. Click Save Schedule.

Important Notes

  • If multiple Geo-Devices are selected, the rule waits until the last device enters or exits the Geo-Fence before triggering.
  • Smart Away only works when thermostat scheduling is enabled.
  • Partitioned security systems: Smart Away follows the arming status of Partition 1 only.

Need More Help?

Explore these resources:

Feedback
0 out of 0 found this helpful

Attachments

Configure_the_Smart_Away_thermostat_schedule.pdf
scroll to top icon