How to Enroll or Delete a Schlage BE468 Touchscreen Deadbolt from a Z-Wave Network

Z-Wave locks use encrypted communication, keeping connections secure. This added security requires extra Z-Wave commands during enrollment, which can sometimes cause communication breakdowns if the process isn’t followed closely.

Important Notes

• Do not add or delete user codes locally.
• Keep the lock within six feet of the panel during enrollment to ensure a reliable connection.

Enroll the Schlage BE468 Deadbolt

1. Place the lock within six feet of the panel or module.
2. Put the panel into Add Mode.
3. Press the Schlage button on the lock.
4. Enter the six-digit programming code.
5. Press [0]. The programming indicator will flash rapidly while the lock is being included.
6. When enrollment is successful, a checkmark will appear on the lock screen.
7. Wait at least two minutes before locally operating the lock.
8. Verify the lock shows up on the Alarm.com website and responds to lock/unlock commands.
9. Move the lock to its final location and run a Network Rediscovery using the Partner Portal or MobileTech app.

Delete the Schlage BE468 Deadbolt

1. Place the panel into Delete Mode.
2. Press the Schlage button.
3. Enter the six-digit programming code.
4. Press [0]. The programming indicator will flash rapidly while exclusion is in process.
5. When the lock has been successfully excluded, a checkmark will display on the screen.
6. Run a Network Rediscovery using the Partner Portal or MobileTech app.

Additional Resources

• Smart Lock Installation
• Home Automation Solutions
• Contact True Protection Support