You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > True Protection > Home Automation Equipment > Schlage Z-Wave Lever Lock (FE599) - Installation Guide [Legacy]
Schlage Z-Wave Lever Lock (FE599) - Installation Guide [Legacy]
print icon

Schlage Z-Wave Lever Lock (FE599)

The Schlage FE599 Z-Wave Lever Lock is supported only on systems using a 300 series (or older) Z-Wave chip. The manufacturer will not be updating this lock, and Alarm.com will continue to support it only on these older systems.

Important: This lock is not compatible with newer Z-Wave systems. It should only be used with older setups to ensure proper communication and reliability.

Supported Security Panels

  • DSC / Interlogix Modules (Versions 185 or lower)
  • GoControl 1
  • GoControl 2

We do not advise using this lock with any other systems, as performance and compatibility cannot be guaranteed.

Recommended Alternatives

Instead of this legacy lock, Alarm.com recommends installing one of the supported modern locks.

Manufacturer Documentation

The guides attached to this page have been written by a third party and are not maintained by Alarm.com.

Any questions regarding installation, maintenance, or usage instructions should be directed to the device manufacturer (Schlage).

Explore related smart home and security resources from True Protection:

Feedback
0 out of 0 found this helpful

Attachments

schlage_lever_lock_FE599_installationguide.pdf
scroll to top icon