How to Enroll or Delete a Yale Assure Touchscreen Deadbolt (YRD256) from a Z-Wave Network

Z-Wave locks communicate using encrypted signals, ensuring secure operation. With this added security, the lock and controller must use additional Z-Wave commands during enrollment, slightly increasing the chance of communication issues if the process isn’t followed correctly.

Important Notes

• Do not add or delete user codes locally.
• Always begin the enrollment process with the lock within six feet of the panel or module.

Enroll the Yale Assure Touchscreen Deadbolt (YRD256)

1. Ensure the lock is within six feet of the panel or module.
2. Put the panel into Add Mode.
3. On the lock, enter the master code, then press the gear button [⚙].
4. Press [7], then press the gear button [⚙].
5. Press [1], then press the gear button [⚙].
6. Wait two minutes before attempting to operate the device locally.
7. Verify that the lock appears on the Alarm.com website and responds to lock/unlock commands.
8. Move the lock to its permanent location and perform a Network Rediscovery using the Partner Portal or MobileTech app.

Delete the Yale Assure Touchscreen Deadbolt (YRD256)

1. Put the panel into Delete Mode.
2. On the lock, enter the master code, then press the gear button [⚙].
3. Press [7], then press the gear button [⚙].
4. Press [3], then press the gear button [⚙].
5. Run a Network Rediscovery using the Partner Portal or MobileTech app.

Additional Resources

• Smart Lock Solutions
• Home Security Systems
• Contact True Protection Support