ADC-V723 Outdoor Wi-Fi Camera: Installation & Setup Guide

The ADC-V723 is a 1080p outdoor Wi-Fi camera designed for reliable video monitoring with Alarm.com. This guide covers the pre-installation checklist, setup methods, LED reference, and troubleshooting tips.

Pre-Installation Checklist

• ADC-V723 camera (included)
• AC power adapter (included, 10 ft cable)
• 2.4 GHz or 5 GHz Wi-Fi broadband internet (Cable, DSL, Fiber)
• Computer, tablet, or smartphone (required if router does not support WPS)

Note: Use WPS mode if supported by the router. AP mode is the most reliable method if WPS is unavailable.

In the Box

• V723 camera
• Mounting plate
• Power supply (10 ft)
• Installation guide
• Wall anchors & screws (x2)

For detailed specs, see the 1080p Outdoor Wi-Fi Camera (ADC-V723) Data Sheet.

Physical Installation Recommendations

• Install in a shaded or covered area (e.g., under an eave).
• Mount bracket on a vertical surface.
• Angle the camera face slightly downward.
• Ensure SD card door faces down to protect from moisture.

Installation & Setup

Customer Mobile App Installation

1. Download or update the Alarm.com Customer App.
2. Log in and tap the navigation menu.
3. Tap + Add Device → Video Camera → ADC-V723.
4. If Add Device is unavailable, use AP or WPS mode instead.
5. Follow on-screen instructions to complete installation.

Technician MobileTech Installation

1. Log in to MobileTech and select the customer’s account.
2. Tap Quick Actions → Add Device → Video.
3. Follow on-screen instructions to complete installation.

AP Mode Setup

1. Plug in the camera’s power adapter near its final location.
2. Wait for LED to flash white. If not, hold Reset ~6s until it flashes white.
3. On a Wi-Fi enabled device, connect to ADC-V723 (XX:XX:XX) (last 6 MAC digits).
4. Open a browser and enter 192.168.1.1.