This LED status indicates the SkyBell HD Wi-Fi Doorbell Camera's (ADC-VDB101/102) battery is charging. It is normal for the camera to do this for 5-45 minutes when it is first connected. If there are other pieces of hardware to install, consider wiring the SkyBell HD Wi-Fi Doorbell Camera first to allow adequate time for charging.

If the SkyBell HD Wi-Fi Doorbell Camera continues to flash red and blue:

1. Confirm the power being supplied from the transformer is adequate.
   • Operational range: 8-36 VAC
   • Ideal range: 12-26 VAC
2. Power cycle the SkyBell HD Wi-Fi Doorbell Camera. To perform a power cycle:
   1. Remove the SkyBell HD Wi-Fi Doorbell Camera from the mounting bracket. 
   2. Wait two minutes.
   3. Remount the SkyBell HD Wi-Fi Doorbell Camera.