Kwikset 910 Deadbolt (SmartCode Deadbolt 99100) - Battery Replacement
May 20, 2021
98
|
The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full installation guide, see Kwikset 910 Deadbolt (SmartCode Deadbolt 99100) - Installation Guide. |
The Kwikset 910 Deadbolt requires four AA batteries.
To replace the batteries in a Kwikset 910 Deadbolt:
- Remove the lock cover.
- Take out the battery pack.
- Insert new AA batteries into the battery pack.
- Slide the battery pack back into the lock panel.
- Reinstall the lock cover.
Note: If the low battery does not automatically clear on the customer's equipment list, request an updated status from the lock using the Partner Portal or MobileTech app. For more information about requesting the status, see Request an updated status on Z-Wave devices.
