The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full installation guide, see 2GIG GC3 Panel - Installation Gui…
The 2GIG Z-Wave Thermostat (CT30e) requires three AA Alkaline batteries. Special battery warning * Always replace the batteries as soon as the Low Batt flashes. The thermostat is a battery-powered device. You must be responsible to replace batteries before they run out. Failure to replace batteries can result in…
The Qolsys IQ Panel 2 requires a special battery pack available for purchase from the manufacturer. To replace the battery in a Qolsys IQ Panel 2: If desired, put the system in test mode with the monitoring station before proceeding. For more information, see Put a system On Test with the monitoring station . Cau…
The Schlage FE599 Z-Wave Lever Lock is only supported by security panels with a 300 series (or older) Z-Wave chip. The manufacturer will not be updating this lock, and Alarm.com will only continue to support this lock on these older systems. These systems include DSC/Interlogix modules (versions 185 or lower) and the…
Alarm.com is choosing to end support for the 2GIG CT-100, the 2GIG CT-30, and the GE TSTAT-300 thermostats. It will not be possible to control those thermostats from the app or website for any new accounts created or accounts recycled after May 27th, 2018. Older accounts created before that date will not be affected.…
The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full installation guide, see Kwikset 912 Lever Lock (SmartCod…
Yale Assure Touchscreen Lever Lock (YRL226) requires four AA Alkaline batteries. To replace the batteries in a Yale Assure Touchscreen Lever Lock (YRL226) : * Remove the battery cover. * Insert four new AA batteries, then reinstall the battery cover. Note : If the low battery does not automatically clear on the c…
The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full installation guide, see Kwikset 914 Deadbolt - Installat…
The Yale NexTouch Sectional Mortise Lock requires four AA batteries. To replace the batteries in a Yale NexTouch Sectional Mortise Lock: * Remove the battery cover. * Insert four new AA batteries, then reinstall the cover. Note : If the low battery does not automatically clear on the customer's equipment list, …
The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full user guide, see Schlage Z-Wave Deadbolt (BE369) [Legacy] - …