Kwikset 914 Deadbolt – Installation Guide & Battery Replacement

The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer.

Battery Replacement Instructions

The Kwikset 914 Deadbolt requires four AA batteries. Follow these steps to replace them:

1. Verify the turnpiece is in the vertical position.
2. Remove the lock cover.
3. Remove the battery pack.
4. Insert new AA batteries into the battery pack, ensuring correct polarity.
   Tip: For best results, use new non-rechargeable Alkaline batteries only.
5. Slide the battery pack back into the lock panel.
6. Reinstall the lock cover.

Note: If the low battery warning does not automatically clear from the customer’s equipment list, request an updated status from the lock using the Partner Portal or MobileTech app. 

Additional Resources

• Home Security Systems
• True Protection Support