GE/UTC Z-Wave Thermostat (GE IS-ZW-TSTAT-100) - Battery Replacement
May 28, 2021
103
|
The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full installation guide, see GE/UTC Z-Wave Thermostat (GE IS-ZW-TSTAT-100) - Installation Guide. |
The IS-ZW-TSTAT-100 requires three AA Alkaline batteries. Batteries are used for backup in case of power loss. It is not recommended to use the batteries as the primary source of power.
To replace the batteries in a GE/UTC Z-Wave Thermostat:
- Press the Heat/Cool Mode button to Off and press the Fan button to Auto.
- Remove the bottom cover section to access the battery compartment.
- Install three AA Alkaline batteries according to the polarity noted in the battery compartment.
Important: Do not use rechargeable batteries.
- Replace the bottom cover.
