The content on this page has been written by a third party and is not maintained by Alarm.com.

Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer.

To access the full installation guide, see 2GIG Z-Wave Plus Battery Powered Thermostat (2GIG-STZ-1) - Installation Guide.

The 2GIG Z-Wave Plus Battery Powered Thermostat (2GIG-STZ-1) requires four AA batteries.

To replace the batteries in a 2GIG Z-Wave Plus Battery Powered Thermostat (2GIG-STZ-1):

1. Open the thermostat battery front panel by using fingernails at the indents on the top of the case.
   
   
    
2. Install the four type AA batteries.
   
   
    
3. Reassemble the thermostat.