You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > True Protection > Home Automation Equipment > Schlage Z-Wave Lever Lock (FE599) - Battery Replacement [Legacy]
Schlage Z-Wave Lever Lock (FE599) - Battery Replacement [Legacy]
print icon

Schlage FE599 Z-Wave Lever Lock – Battery Replacement and Compatibility Guide

The Schlage FE599 Z-Wave Lever Lock is only supported by security panels with a 300 series (or older) Z-Wave chip. The manufacturer will not be updating this lock, and Alarm.com will only continue to support this lock on these older systems. These systems include DSC/Interlogix modules (versions 185 or lower) and the GoControl1 and GoControl2 panels. We do not advise using this lock with any other system.

Instead of this device, Alarm.com recommends installing any of the other locks listed on the Alarm.com Ecosystem.

Battery Replacement Instructions

The Schlage Z-Wave Lever Lock (FE599) requires four AA batteries.

  1. Remove cover screws and lift off the lock cover.
  2. Remove the battery cover.
  3. Take out the four old AA batteries.
  4. Insert four new, high-quality AA batteries.
  5. Replace the battery cover and lock cover.

Note: If the low battery indicator does not automatically clear on the customer’s equipment list, request an updated status from the lock using the Partner Portal or MobileTech app.

Related Resources

For help upgrading from legacy Z-Wave locks or to learn about smart lock options compatible with your True Protection system, visit our Home Security page. 

Feedback
0 out of 0 found this helpful

Attachments

Schlage_Z-Wave_Lever_Lock_FE599_-_Battery_Replacement_Legacy.pdf
scroll to top icon