Qolsys IQ Panel 2 Software Version 2.3.0 - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Qolsys IQ Panel 2 - Panel-specific app feature compatibility
Some features of the Alarm.com mobile app are available or unavailable depending on panel limitations. For information about which features are available for each app operating system version, see Alarm.com app feature compatibility . App features Panel Silent Arming No Entry Delay Remotely Bypass Sensors Q…
Remotely Program a Sensor to a Qolsys IQ Panel 2
Sensors can be programmed to a Qolsys IQ Panel 2 remotely using the Partner Portal and MobileTech. Note : Device partitions can be configured on the Qolsys IQ Panel 2 with firmware 2.3.0+. For more information about partitions on the Qolsys IQ Panel 2, see How do multiple partitions work with the Qolsys IQ Panel 2?…
Enable the Qolsys IQ Panel 2 Glass Break Detector
The Qolsys IQ Panel 2 has a built-in glass break detector that is supported by Alarm.com. There is no additional service package add-on required to enable this feature. The panel's glass break detector is enabled using the Qolsys IQ Panel 2, Partner Portal, or MobileTech app. Once enabled, the panel glass break dete…
Adjust the Image Sensor PIR sensitivity on a Qolsys IQ Panel 2
By default, the Image Sensor is configured with a standard motion sensitivity profile Normal . The sensor can also be set to a more sensitive motion profile (i.e., High ) and a less sensitive profile with pet immunity for pets up to 40 lbs (i.e., Low ). Adjust the PIR sensitivity Use the Partner Portal or Mobile…
What is PowerG on the Qolsys IQ Panel 2?
PowerG is a commercial-grade, two-way communications protocol with an extreme range of over 6,000 feet (about 2,000 meters), much greater than the industry standard. The signal automatically adjusts to preserve device battery life, up to eight years. The PowerG network uses Frequency Hopping Spread Spectrum technolo…
Enable the Manage My System Landing Page on a Qolsys IQ Panel 2
The Qolsys IQ Panel 2 supports the Manage My System landing page enabling users to see the panel’s Wi-Fi connectivity status, the panel's software version, and the state of the panel’s Bluetooth radio. The following image is an example of how the Manage My System landing page appears on the Qolsys IQ Panel 2 s…
Interact with a Z-Wave device from a Qolsys IQ Panel 2
The Qolsys IQ Panel 2 allows users to interact with Z-Wave lights, locks, thermostats, and garage devices locally at the panel. For information about adding Z-Wave devices, see Manage Z-Wave devices on a Qolsys IQ Panel 2 . Note : Additional Z-Wave devices may be able to be added and controlled locally. For more in…
Enable Qolsys IQ Panel 2 Panel Motion Detector
The Qolsys IQ Panel 2’s panel camera can function as a motion detector. Enabling the panel camera motion detector creates an independent zone that leverages the panel’s built-in camera to act as an activity motion detector. This falls into the zone order at the time you enable this feature. Motion can trip once every…
What is the difference between the Qolsys IQ Panel 2 and the IQ Panel 2 Plus?
Unlike the Qolsys IQ Panel 2, the IQ Panel 2 Plus includes a built-in PowerG daughtercard. Since the PowerG daughtercard uses the same antenna as the Image Sensor daughtercard, the IQ Panel 2 Plus is not compatible with the Image Sensor. The Qolsys IQ Panel 2 and 2 Plus are both compatible with the PowerG PIR camera…
