Technical Advisory Qolsys IQ Panel 2 - 2.5.3 LiftMaster Integration Notice
Technical Advisory: Qolsys IQ Panel 2 – LiftMaster Integration (Firmware 2.5.3) The guides attached to this page have been written by a third party and are not maintained by True Protection. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the dev…
Qolsys IQ Panel 2 - Features
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Qolsys IQ Panel 2 - Image Sensor IQ Card Installation
Third-Party Device Guides Disclaimer The guides attached to this page have been written by a third party and are not maintained by True Protection . Important: Any questions regarding the installation, maintenance, or usage instructions in these guides should be directed to the device manufacturer . Need Help…
Send Help Videos to the Qolsys IQ Panel 2
Qolsys IQ Panel 2 Help Videos Instructional help videos can be remotely sent to a Qolsys IQ Panel 2 using the Partner Portal. These videos are general tutorials covering panel features and basic functions. Requirements * Panel firmware version 2.1.0+ . * Panel must be connected to Wi-Fi. Note: When help videos…
Is the Qolsys IQ Panel 2 Plus compatible with the Image Sensor?
Qolsys IQ Panel 2 – PowerG Daughtercard & Image Sensor Compatibility
View sensor signal strength for the Qolsys IQ Panel 2
View Sensor Signal Strength on the Qolsys IQ Panel 2 You can view wireless sensor RF health through the Partner Portal or MobileTech. This guide covers the hardware requirements and the steps to retrieve both Latest Sensor Signal Strength and Average Sensor Signal Strength for each device. Requirements * Qols…
Qolsys IQ Panel 2 Software Version 2.3.0 - User Guide
Qolsys IQ Panel 2 User Guide — Software Version 2.3.0 This guide covers how to use the Qolsys IQ Panel 2 on software version 2.3.0, including system basics, arming/disarming, and everyday panel features. Panel Overview The Qolsys IQ Panel 2 is a touchscreen security and smart home controller powered by Alarm.com. …
Remotely Program a Sensor to a Qolsys IQ Panel 2
Program Sensors Remotely on Qolsys IQ Panel 2 Note: Device partitions can be configured on the Qolsys IQ Panel 2 with firmware version 2.3.0+. Program Sensors Using the Partner Portal * Log into the Partner Portal and locate the customer account. * Click Equipment → Sensors . * Configure an existing device:…
Qolsys IQ Panel 2 - Quick Install Guide
Third-Party Guides Disclaimer The guides attached to this page have been written by a third party and are not maintained by Alarm.com or True Protection. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. Helpful True Prot…
Dialer delay settings for the Qolsys IQ Panel 2
Qolsys IQ Panel 2 – Dialer Delay & SIA Limits Overview Dialer delay determines how long the panel waits (in seconds) after an alarm before reporting to the monitoring center. Ranges depend on whether SIA Limits are enabled. Dialer Delay Ranges Mode Default Minimum Maximum SIA Limits Enabled 30 seconds 15 sec…
