Access the ADC-V522IR mounting bracket
The ADC-V522IR can be mounted indoors by using its mounting bracket. To access the ADC-V522IR's mounting bracket: * Find the locked and unlocked symbols on the base of the camera. The bottom half of the base is the mounting bracket. * Twist counter-clockwise until the mark lines up with the unlocked symbol. * Li…
Update the firmware on an ADC-V522IR
The firmware of an Alarm.com video device can be updated remotely using the Partner Portal, MobileTech app, or Customer Website. Note : The Upgrade option only appears when there is an available update for the video device. To update the firmware using the Partner Portal: * Log into the Partner Portal. * Find …
Where is the MAC address located on the ADC-V522IR?
The MAC address is hidden behind the camera mount below the QR code. To reveal the camera's MAC address, twist it to either side.
Indoor Fixed w/IR (ADC-V522IR) - Data Sheet
Crystal-clear 1080p HD video, infrared night vision and secure cloud recording make the ADC-V522IR Wi-Fi Video Camera from Alarm.com ideal for indoor video monitoring. With its compact design and flexible mounting options, the ADC-V522IR is easy to install – whether mounted on a wall or ceiling or simply placed on a …
Use WPS to enroll the ADC-V522IR
WPS (Wi-Fi Protected Setup) is a protocol supported by most routers. When WPS mode is triggered on both the router and the camera, they will attempt to connect, and the router will automatically pass the wireless information (e.g., SSID, password, etc.) to the camera. This removes the need to input this information m…
What do the LEDs on the ADC-V522IR mean?
LED pattern Status Description Connected to the internet Local network and internet connection with Alarm.com IP. Local network connection Local network connection with local IP address, no internet. Note : If the LED does not go solid green after a few minutes, see Camera LED is blinking green . Pow…
Factory reset an ADC-V522IR to its default settings
Resetting a video device to its factory defaults removes all programming and memory from the device. Important : Wait at least two minutes for the video device to power on fully before performing the following procedure. The factory reset might fail if the device is still powering on. Reset procedure Reset button…
Indoor Fixed w/IR (ADC-V522IR) - Installation Guide
Pre-installation checklist * ADC-V522IR camera (included) * AC Power adapter (included) * Ethernet or Wireless (2.4 or 5 GHz) connection to broadband (Cable, DSL, or Fiber Optic) Internet * A computer, tablet or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup (WPS) feature…
