132
The 2GIG-SMKT3-345 is a wireless Smoke/Heat/Freeze all in one sensor. When enrolling this device to the panel, repeat the Programming instructions from the attached installation guide for each of the three features using a different loop number for each feature.
For example, the sensor is programmed into sensor 1 for the smoke function and is enrolled into the panel using loop number 1. If the user also wants to use the heat function, the same sensor is programmed into sensor 2 but loop number 2 is used instead to indicate it's for heat detection.
|
The following guide attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GoControl Installation Guide - Wireless Smoke/Heat Alarm. |
