2GIG GoControl Panel Version 1.16 - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GoContr…
Find the firmware version of a 2GIG GoControl locally
The firmware version of a 2GIG GoControl can be found in the panel. To find the firmware version of a 2GIG GoControl using the control panel: * Tap Security . * Tap Menu . * Tap Toolbox . * Enter the master code. * In the Toolbox , tap → to scroll to the next page. * Tap Version . The 2GIG GoControl'…
Improve Image Sensor signal strength with a 2GIG GoControl
2GIG Image Sensors do not show the signal strength due to the radio frequency (RF) protocol used by 2GIG. However, 2GIG panels can check if the Image Sensor is connected to the network through the native Sensor Test menu. To access Sensor Test from the panel: * Tap Security . * Tap Menu . * Enter the master o…
2GIG GoControl 4 Button Key Ring Remote - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GoContr…
2GIG GoControl - Quick Programming Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG Go!Cont…
Interact with a Z-Wave device from a 2GIG GoControl
The 2GIG GoControl 1 and 2 panel allows users to interact with Z-Wave lights, thermostats, locks, and garage devices locally at the panel in the Services menu. Note : Additional Z-Wave devices may be able to be added and controlled locally. For more information, refer to the device manufacturer. To interact with …
2GIG GoControl Panel - User Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GoContr…
2GIG GoControl panel emits loud noise when arming
The loud sound emitted by a 2GIG GoControl panel (or the siren sound for three seconds, if an external siren is attached) when arming is due to UL supervision settings. When the commercial UL option is selected in the customer's monitoring settings, the panel emits an audible indicator of acknowledgment when an armin…
Adjust the Image Sensor PIR sensitivity on a 2GIG GoControl
PIR sensitivity settings By default, the Image Sensor is configured with a standard motion sensitivity profile Normal . The sensor can also be set to a more sensitive motion profile (i.e., High ) and a less sensitive profile with pet immunity for pets up to 40 lbs (i.e., Low ). The sensitivity can be configured …
2GIG GoControl - Sensor Restorals
Sensor restorals are sent if a sensor triggers an alarm and is then closed or reset before the system is disarmed. Important : Sensor restorals are forwarded only if the sensor is closed before disarming the panel. If the panel is disarmed with the sensor open, then the sensor is closed after disarming, a restoral i…
