The temperature format that displays on the 2GIG GC3 panel can be changed by using the 2GIG GC3 panel, Partner Portal, MobileTech app, or the Customer app. 

For more information about how the customer can adjust the temperature format using the Customer app, see Change system settings using the Customer app. 

To change the temperature format (units) using a 2GIG GC3 panel:

1. Tap System Settings.
2. Enter the installer code.
3. Tap Installer Toolbox. 
4. Tap System Configuration.
5. Tap Panel Programming. 
6. Tap Go to Question. 
7. Tap 24 to navigate to Q24: Choose between Fahrenheit or Celsius.
8. Tap the desired option for the setting. 
9. Once complete, tap Return To System Configuration to exit panel programming. 

To change the temperature format (units) using the Partner Portal: 

1. Log into the Partner Portal. 
2. Find the customer account. 
3. Click Remote Toolkit. 
4. In the Command Catalog, click to expand General. 
5. Click Q24: Select temperature display units (0 to 1).
6. Using the New value dropdown menu, select either Fahrenheit or Celsius. 
7. Click Change. Allow a few minutes for the updates to send to the panel.

To change the temperature format (units) using the MobileTech app: 

1. Log into the MobileTech app. 
2. Find the customer account. 
3. Tap Remote Toolkit. 
4. Tap Command Catalog.
5. Tap to expand General. 
6. Tap Q24: Select temperature display units (0 to 1).
7. Using the New value dropdown menu, select either Fahrenheit or Celsius. 
8. Tap Change. Allow a few minutes for the updates to send to the panel.