Qolsys IQ Panel 2 Software Version 2.4.0 - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. New features in this firmware release The following new features…
Send a Message to a Qolsys IQ Panel 2
Enterprise Notices allow dealers to send messages to be displayed locally at the panel. There are multiple default messages to choose from that can be sent to the panel. This feature does not allow personalized messages to be sent to the panel. Currently, the messages are only available in English. To send a message…
Enable the Qolsys IQ Panel 2 Glass Break Detector
The Qolsys IQ Panel 2 has a built-in glass break detector that is supported by Alarm.com. There is no additional service package add-on required to enable this feature. The panel's glass break detector is enabled using the Qolsys IQ Panel 2, Partner Portal, or MobileTech app. Once enabled, the panel glass break dete…
Enable/Disable Commercial Sensor and Device Names on the Qolsys IQ Panel 2
This feature enables a set of preset commercial sensor and device names in place of the residential names when installing devices into a Qolsys IQ Panel 2. Commercial names can be enabled or disabled using the panel, Partner Portal, or MobileTech app. Important : The Qolsys IQ Panel 2 must be on firmware version 2.…
Qolsys IQ Panel 2 - Sensor Groups
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
Enable Doorbell Camera Notifications to Qolsys IQ Panel 2
Receive notifications on the Qolsys IQ Panel 2 screen when a doorbell camera detects motion or the button is pushed. Requirements To enable doorbell camera notifications to the Qolsys IQ Panel 2: Service package A service package that supports at least one doorbell camera. Panel hardware Firmware versio…
Technical Advisory Qolsys IQ Panel 2 - 2.5.2 Software Update
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer.
View the PowerG PIR Camera Images for a Qolsys IQ Panel 2
PowerG PIR cameras (PG9934 and PG9944) enrolled on a Qolsys IQ Panel 2 can upload alarm and Peek-in Now images to Alarm.com. Captured images are saved in the Images event gallery. For more information about viewing the event gallery, see View the Images Event Gallery and Past Events . Requirements To upload P…
Adjust the Image Sensor PIR sensitivity on a Qolsys IQ Panel 2
By default, the Image Sensor is configured with a standard motion sensitivity profile Normal . The sensor can also be set to a more sensitive motion profile (i.e., High ) and a less sensitive profile with pet immunity for pets up to 40 lbs (i.e., Low ). Adjust the PIR sensitivity Use the Partner Portal or Mobile…
Qolsys IQ Panel 2 - Panel-specific app feature compatibility
Some features of the Alarm.com mobile app are available or unavailable depending on panel limitations. For information about which features are available for each app operating system version, see Alarm.com app feature compatibility . App features Panel Silent Arming No Entry Delay Remotely Bypass Sensors Q…
