Take a Peek-in from the Qolsys IQ Panel 2 camera
Peek-Ins allow users to take on-demand snapshots from the Qolsys IQ Panel 2 panel camera using the Customer Website and app. Captured Images are saved in the Images event gallery. For more information about viewing the event gallery, see View the Images Event Gallery and Past Events . Compatibility * The Qolsy…
Customize the Panel Setup Wizard for the Qolsys IQ Panel 2
Several steps of the panel setup wizard on the Qolsys IQ Panel 2 can be customized using the Partner Portal or MobileTech app. For information about locally customizing the setup wizard using the panel, see page 22-25 of Qolsys IQ Panel 2 Software Version 2.5.0 - Installation Guide . Important : The Qolsys IQ Panel…
Does the IQ Panel 2 have a secondary touchscreen keypad?
Yes. The IQ Remote is the name of the secondary touchscreen keypad compatible with the Qolsys IQ Panel 2. Note : The IQ Remote is not the same as the IQ2, which is the secondary touchscreen for the first generation Qolsys IQ Panel. The IQ2 cannot be used with the IQ Panel 2, and the IQ Remote cannot be used with the…
Configure Face Recognition for unexpected activity on a Qolsys IQ Panel 2
Customers can monitor for unauthorized code sharing and receive alerts whenever the person using a disarm code is different from the person assigned to that code. These alerts include a disarm image taken at the panel, so customers can see who accessed their properties and take immediate action as needed. This featur…
Send a Message to a Qolsys IQ Panel 2
Enterprise Notices allow dealers to send messages to be displayed locally at the panel. There are multiple default messages to choose from that can be sent to the panel. This feature does not allow personalized messages to be sent to the panel. Currently, the messages are only available in English. To send a message…
Enable/Disable Commercial Sensor and Device Names on the Qolsys IQ Panel 2
This feature enables a set of preset commercial sensor and device names in place of the residential names when installing devices into a Qolsys IQ Panel 2. Commercial names can be enabled or disabled using the panel, Partner Portal, or MobileTech app. Important : The Qolsys IQ Panel 2 must be on firmware version 2.…
Enable the Manage My System Landing Page on a Qolsys IQ Panel 2
The Qolsys IQ Panel 2 supports the Manage My System landing page enabling users to see the panel’s Wi-Fi connectivity status, the panel's software version, and the state of the panel’s Bluetooth radio. The following image is an example of how the Manage My System landing page appears on the Qolsys IQ Panel 2 s…
Enable the Qolsys IQ Panel 2 Glass Break Detector
The Qolsys IQ Panel 2 has a built-in glass break detector that is supported by Alarm.com. There is no additional service package add-on required to enable this feature. The panel's glass break detector is enabled using the Qolsys IQ Panel 2, Partner Portal, or MobileTech app. Once enabled, the panel glass break dete…
How do multiple partitions work with the Qolsys IQ Panel 2?
Compatibility * On panel firmware version below 2.3.0, the Qolsys IQ Panel 2 supports one partition. * On panel firmware version 2.3.0+, the Qolsys IQ Panel 2 supports up to four partitions. For more information about updating the panel firmware remotely, see Upgrade the firmware on a Qolsys IQ Panel 2 . Remotel…
View the PowerG PIR Camera Images for a Qolsys IQ Panel 2
PowerG PIR cameras (PG9934 and PG9944) enrolled on a Qolsys IQ Panel 2 can upload alarm and Peek-in Now images to Alarm.com. Captured images are saved in the Images event gallery. For more information about viewing the event gallery, see View the Images Event Gallery and Past Events . Requirements To upload P…
