If the error message Remote provider not set displays when trying to send a communication test, verify Q7 is set to Alarm.com in panel programming on the 2GIG GC3. To verify Q7 using the 2GIG GC3: * Tap System Settings . * Enter the installer code. * Tap Installer Toolbox . * Tap System Configuration .…
Panel programming for the 2GIG GC3 can be configured locally using the panel or remotely using the Partner Portal or MobileTech app. To configure panel programming using the panel: * On the home screen, tap System Settings . * Enter the installer code. * Tap Installer Toolbox . * Tap System Configuration . …
The content on this page has been written by a third party and is not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer. To access the full installation guide, see 2GIG GC3 Panel - Installation Gui…
The panel can be connected to a Wi-Fi network by either manually selecting the network or using Wireless Protected Setup (WPS). Once the system is connected to Wi-Fi, Dual-Path communication can also be enabled. For more information about enabling Dual-Path, see Enable or disable Dual-Path communication remotely . …
The auto stay feature is a way for panels to prevent false alarms. If arming locally, the customer must exit through an entry/exit sensor during the exit delay in order to have the panel arm away. Otherwise, it always reverts to arm-stay. This is not the case when arming from an app or keyfob. To enable auto stay lo…
Each sensor (wireless or wired) installed in the system is programmed to a specific sensor number and sensor type (zone). The sensor number identifies the specific sensor when it is displayed on the Control Panel, recorded in the event log, or reported to the monitoring station. This allows pinpointing information…
On the 2GIG GC3, zones 99 and 100 can be configured to be cross zones. Cross zoning helps with false alarm reduction and unnecessary police dispatches. Typically, cross zoning is used with a motion sensor in a high traffic area combined with either a second motion sensor or a contact sensor nearby. This setup allows…
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GC3 Ima…
Alarm.com offers weather to be displayed on compatible panels. The 2GIG GC3 is compatible with Weather to Panel . On the 2GIG GC3, the current day's weather displays on the home screen. There's also the option to tap Hourly or 5 Day to view more weather information. Enable Weather to Panel * To enable Weat…
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG GC3 Pan…