What do the LEDs on the 2GIG HD100 mean?
LED pattern Status Description Power on Camera is powering on Mode selection Camera mode selection is active Network connection incomplete Camera needs IP address (DHCP) No network connection There is no local or Internet connection Connected to internet Local network and internet connectio…
Change the 2GIG HD100 operational mode
The 2GIG HD100 has two operational modes that can be selected during the camera boot-up, Go!2.0 and Go!Control/Alarm.com (default). For the 2GIG HD100 to communicate with Alarm.com it needs to be in Go!Control/Alarm.com mode. The mode can only be changed by while the LED is flashing red and green (i.e., factory rese…
2GIG HD100 Camera - Installation Guide
The guides attached to this page have been written by a third party and are not maintained by Alarm.com. Any questions regarding the installation, maintenance, and/or usage instructions in these guides should be directed to the device manufacturer. To download this guide directly to your device, click 2GIG HD100…
