Factory reset an Alarm.com Smart Thermostat to its default settings
The Alarm.com Smart Thermostat (ADC-T3000 or ADC-T2000) can be reset to factory default locally at the thermostat. To reset the thermostat: Important : If the thermostat is enrolled onto a Z-Wave network, remove the thermostat from the network prior to factory resetting. This action clears Z-Wave network informatio…
Find the serial number on an Alarm.com Smart Thermostat
The serial number of an Alarm.com Smart Thermostat (ADC-T3000 or ADC-T2000) can be found on the box it came packaged in or locally on the thermostat. To find the serial number of an ADC-T3000: On the box: The serial number is the 16-digit located below the barcode on the sticker. On the thermostat: * Identi…
Alarm.com Smart Thermostat (ADC-T3000) - Installation Guide
Before installing or servicing the thermostat, turn off power to the system at the circuit breaker. Leave power off until the thermostat has finished installing or servicing. Shorting the electric terminals at the control on the heating or cooling system may damage the thermostat. Do not test the system this way.…
Alarm.com Smart Thermostat - Troubleshooting Guide
Understanding reported behavior Common problems with heating: * Heat does not turn on * Heat turns on, but the system is not heating * Heat pump is not running * AUX heat is not working * Problem with the fan Common problems with cooling: * Air Conditioner is not turning on * The A/C turns on, but the syste…
Alarm.com Smart Thermostat (ADC-T2000) - Installation Guide
Before installing or servicing the thermostat, turn off power to the system at the circuit breaker. Leave power off until the thermostat has finished installing or servicing. Shorting the electric terminals at the control on the heating or cooling system may damage the thermostat. Do not test the system this way.…
