Find the firmware of an Alarm.com Smart Thermostat
The firmware of an Alarm.com Smart Thermostat can be found locally on the thermostat, on the box, or on the Partner Portal. Note : To update the firmware of an Alarm.com Smart Thermostat, it must be replaced with a new one at this time. To find the firmware locally on the thermostat: ADC-T3000 * Press the butt…
Incompatible Device trouble condition - Alarm.com Smart Thermostat
The Incompatible Device trouble condition appears when an Alarm.com Smart Thermostat is connected to a 2GIG GC3 panel on an incompatible firmware version. 2GIG GC3 The trouble condition that appears reads, Your panel does not support the Alarm.com Smart Thermostat. Please upgrade to version 3.0.1 to enable func…
Alarm.com Smart Thermostat (ADC-T3000) - Data Sheet
Our award-winning, ENERGY STAR® certified Smart Thermostat has been updated by our in-house Design Studio to deliver the best in both form and function. With a rich OLED display, advanced diagnostics, and one-touch commands, Alarm.com’s most innovative thermostat yet combines even smarter features with a superior des…
Alarm.com Smart Thermostat (ADC-T2000) - Data Sheet
Stay comfortable and save money with the ENERGY STAR® certified Smart Thermostat (T2000). Energy-saving schedules and an easy-to-use mobile app make it simple to remotely control your connected thermostat from anywhere. Enjoy precision comfort when paired with an Alarm.com Temperature Sensor. Included in the box …
Alarm.com Smart Thermostat (ADC-T3000) - Battery Replacement
The Alarm.com Smart Thermostat (ADC-T3000) can be powered by two AAA Alkaline batteries. Considerations: * If there are no batteries inserted, and the thermostat is running off solely of AC power, the thermostat will report a low battery (indicated by a caution sign and LOW BATTERY flashing on the display). *…
Operate the Alarm.com Smart Thermostat
The Alarm.com Smart Thermostat (ADC-T3000 and ADC-T2000) can be operated locally in addition to the remote control features on the Customer Website and app. To locally operate the ADC-T3000: Waking the device * Press any button to wake the thermostat up. Note : The ADC-T3000 display cannot stay on permane…
Alarm.com Smart Thermostat (ADC-T2000) - Battery Replacement
The Alarm.com Smart Thermostat (ADC-T2000) can be powered by four AA Alkaline batteries. Considerations: * If there are no batteries inserted, and the thermostat is running off solely of AC power, the thermostat will report a low battery (indicated by LOW then BATT flashing on the display). * Always replace…
Alarm.com Smart Thermostat is not controlling HVAC properly
The Alarm.com Smart Thermostat may run into an issue where: * It is not turning on heat or AC. * It only controls heat or AC and not both. * Heat or AC run continuously when it should not. Note : For non-Alarm.com thermostat configuration assistance, contact the device manufacturer. If the Alarm.com Smart Ther…
Enroll and configure the Alarm.com Smart Thermostat
Add or remove the Smart Thermostat To add or remove the ADC-T3000: If using a Z-Wave Security 2 (S2) and/or SmartStart-capable Z-Wave controller, see Add an S2-encrypted Z-Wave device or Add or remove a Z-Wave SmartStart-enabled device . If not, refer to the steps below: * Put the Z-Wave controller into…
Alarm.com Smart Thermostat - Wiring and Configuration Guide
For an HVAC system to be compatible with the Smart Thermostat, the system must be wired to an existing compatible thermostat. This guide assists with wiring and configuration when swapping an existing thermostat with the ADC-T3000 or ADC-T2000. Finding previous thermostat model and wiring Before replacing a therm…
